2:1 Two Part Epoxy Resin System 1.5 Gal. Kit
C& J Composites Technology has a base resin system that was originally developed for lightweight hand lay-up composite systems. Its unique four way flex controlled resin ensemble provides more latitude in developing production systems than any other resin system available today.
The balance of excellent color, UV stability, varying hardener speeds, easy mix ratios, extremely low vapor pressure, excellent chemical adhesion and high gloss finish make this resin system easy to use and an effective production contributor to everyone from the small craftsman to large scale producers.
The resin system package contains an optical brightener and a UV stabilizer. The optical brightener gives the resin a slight blue color and makes products appear whiter. The UV absorber is a shield which blocks damaging UV rays. The UV sensitive resin system will significantly protect and enhance the finished high gloss surface.
Resin/Hardener Typical Physical Properties
|
Typical Application
|
All purpose system. Best for use with most fiberglass and carbon fiber hand lay-up systems. Also used in, marine, adhesives, coatings, vacuum bagging, casting, and electronic encapsulation.
|
Viscosity cps @ 25C
|
1600
|
Mix by Volume
|
2 to 1
|
Mix by Weight
|
100 to 45
|
Tensile Strength
|
9,800
|
Tensile Modulus
|
405,000
|
Flexural Strength
|
14,800
|
Flexural Modulus
|
480,000
|
HDT
|
122F
|
Compression. Yield
|
15,400
|
Elongation %
|
3.8
|
Hardener
|
Mix Ratio
|
Pot Life
|
Set Time
|
Typical Cure
Schedule
|
|
Weight
|
Volume
|
@25C
|
|
|
CJ Epoxy Hardener
|
45
|
50
|
25 min.
|
2.5 hrs
|
room temp
|
Each item contains 1 gallon (128 ounces) of epoxy resin and 1 1/2 gal (64 ounces) of hardener, which consists of a total of 192 ounces. (mix at 2 parts epoxy resin to 1 part of the hardener) 1.5 gal. Kit.
Free delivery for this item!